CFE Image for VU+ solo and duo The CFE image of Vu+ Solo
The main difference from the old one is supporting the large size image more than 48MB. Please see the detailed explanation of update as below.
1) Unzip the solo_cfe_2.0_usb.zip to USB stick. (There should be /vuplus/solo/cfe_cfe_auto.bin) 2) Insert USB stick into the USB port of solo and power on the box. 3) It takes just a few secs to update. 4) If solo's front led blinks continuously, restart box. 5) To proceed with image update, you should delete the cfe_cfe_auto.bin at /vuplus/solo in USB stick once bootloader update is finished. _____________________________________________________
The CFE image of Vu+ duo cfe Rev 3.0
HowTo updating bootloader:
download attached file unzip attached file format USB flash drive in with fat create directory /vuplus/duo at flash drive copy file to directoy /vuplus/duo at flash drive shutdown VU+ STB disconnect all USB devices connect USB flash drive to VU+ STB power on VU+ STB wait for message "Please remove USB" at VFD disconnect USB flash drive power off VU+ STB flash new image
THX an @plnick
P.S: Ovaj image ide samo na USB i služi da resiver može prepoznati USB , pošto se u nekim slučajevima zna desiti da resiver ne vidi USB , ili da je recimo proces ranije isključen pa resiver zaglavi.Nakon ubacivanja usb-a sa ovim image-om i restarta OBAVEZNO ubacite odgovarajući image ponovo u vaš Vu resiver
Pažnja! Nemaš dopuštenje kao gost foruma za pregledavanje i/ili preuzimanje privit(a)ka dodan(og)ih postu.
|